Tube Fittings

"Tiger" Double Ferrule Compression Tube Fittings provide leak proof torque free seals at all tubing connections. They eliminate hazardous leaks in instrumentation, process, pneumatic, hydraulic and other applicable tubing systems, which in could otherwise turn out to be costly to the installation. 

The basic is a four piece fitting consisting of the Nut, Back Ferrule, Front Ferrule and Body. When installed it becomes a four piece connection with addition of the tubing providing a solid leak free joint. The two ferrules grasp tightly around the tube with no damage to the tube wall. Exhaustive tests have been proven that tubing will yield before "Tiger" Compression Tube Fitting joints start leaking.

Features

  • Fittings are designed to withstand high pressure and severe operating conditions.
  • They meet the requirements of the industry such as Proof Test, Dismantling and Reassembly Test, Burst
  • Pressure Test, Vacuum Test and Vibration Test.
  • Fittings are easy to be assembled; only an open wrench is required.
  • Variety of ends and patterns.
  • Various types of Plating used to avoid galling.
  • PMI (Positive Material Identification) Test available on request.
  • Pressure Temperature Rating Up to 400 Kg/Cm².
  • Standard Followed: BS 4368 Part IV.
Note: When assembling tapered pipe thread, it is mandatory to use thread sealant ‘Tiger’ fittings recommends use of TEFLON/PTFE tapes due to ease of its applications.
Ferrules

Spare part for a double ferrule compression tube fitting. (Special requirements available on request)

Nuts

Spare part for a double ferrule compression tube fitting. (Special requirements available on request)

Tube Plug

To seal an apparatus with a compression fitting end. (Special requirements available on request)

Tube Cap

Compression fitting to a cap. (Special requirements available on request)

Tube Union

To connect tubes of same dimension in a straight configuration. (Special requirements available on request)

Bulk Head Union

To join tubes of same dimension through a wall or panel. (Special requirements available on request)

Reducing Union

To connect tubes of different dimensions. (Special requirements available on request)

Union Tee

To connect tubes of same dimension in a ‘T’ configuration. (Special requirements available on request)

Union Elbow

To connect tubes of same dimension at a 90° angle. (Special requirements available on request)

Male Connectors

To connect tubes to female tapered threaded apparatus. (Special requirements available on request)

Union Cross

To connect tubes of same dimensions in a cross/perpendicular configuration. (Special requirements available on request)

Bulkhead Male Connector

To connect to a female tapered threaded apparatus through a wall or panel. (Special requirements available on request)

Male Run Tee

To connect a female tapered threaded apparatus to a gas line at a 90° elbow. (Special requirements available on request)

Bulkhead Female Connector

To connect to a male tapered threaded apparatus or pipe through a wall or panel. (Special requirements available on request)

Female Run Tee

To connect to a male tapered threaded apparatus or pipe to a gas line at a 90° elbow. (Special requirements available on request)

Male Branch Tee

To connect to a female tapered threaded apparatus to a gas line in a ‘T’ configuration. (Special requirements available on request)

Male Elbow

To connect tubes to a female tapered threaded apparatus at a 90° angle. (Special requirements available on request)

Female Branch Tee

To connect a male tapered threaded apparatus or pipe to a gas line in a ‘T’ configuration. (Special requirements available on request)

Female Connector

To connect tubes to male tapered threaded apparatus or pipe. (Special requirements available on request)

Female Elbow

To connect to a male tapered threaded apparatus or pipe to a gas line at a 90° angle. (Special requirements available on request)